CAPINTEC, INC. CAPTUS
®
600
KETCHUM, LIN
PROTOCOL: PROT 1
NUCLIDE: I 131
RX ID : CAPSULE 1
NO. CAPS : 2 TO MEASURE
DONE
P
Figure 9-10
Press PRINT [P] to obtain a printout of all information entered so far (patient data, dosage
information, background count).
Press F4 [DONE] to return to the Patient Selection Screen.
Note: You may enter the time of administration later and since the CAPTUS
®
600 has
already measured the capsule(s), it will decay correct the capsule counts from the
measurement time to the time of administration and use that value as the initial
counts.
Entering Administered Dose Data
Press Y if you are ready to input the administered dose data. The Dosage Data Screen
(
Figure 9-11) will appear.
KETCHUM, LIN
PROTOCOL: PROT 1
ADMINISTERED
DOSE :>
NO. CAPS: 2 IN DOSE
OK
ON : FEB 14, 1992
AT : 09:30
Ci I 131
Figure 9-11
Input the TOTAL “DOSE” in µCi and the number of capsules administered. The Dose is
entered for reference only.
November 07 THYROID UPTAKE: ONE CAPSULE METHOD 9-7
To Next Page
Loading...
