CAPINTEC, INC. CAPTUS
®
600
Probe Detector
NaI(TI) flat face crystal / PM Tube: 5.1 x 5.1 cm (2" x 2")
Features Monoline construction
Pulse Height Resolution - 8% or better for Cs137
Lead Shielded Collimator
Complies with ANSI Standard N44.3-1973
Lined with brass to minimize back scatter
Well Detector – Optional
Single 3.1 m (10 ft) High Voltage and Signal coax cable for placement of well off of
stand
NaI(TI) well type crystal / PM Tube: 5.1 x 5.1 cm (2" x 2")
Well diameter: 1.6 cm (0.625")
Well depth: 4 cm (1.5")
Featuring Monoline construction
Pulse Height Resolution – 8.5% or better for Cs137
Lead shielding – lined with brass (0.16 cm (1/16”) thick) to minimize back scatter
Thickness: 2.5 cm (1")
Height: 39.4 cm (4.5")
Diameter: 11.4 cm (4.5")
Weight: 31.8 kg (70 lb.)
Regulatory Listings
The CAPTUS
®
600 has been independently tested and is manufactured in compliance with
the following Standards:
EMC
• European Union Norm EN 60601-1-2: Medical Electrical Equipment – Part 1
General Requirements for Safety – Section 1.2 Collateral Standard:
Electromagnetic Compatibility – Requirements and Tests
Electrical
• European Union Norm EN 60601-1: Medical Electrical Equipment – Part 1
General Requirements for Safety
• European Union Norm EN 60601-1-1: Medical Electrical Equipment – Part 1
General Requirements for Safety – Section 1.1 Collateral Standard: Safety
Requirements for Medical Electrical Systems
ETL Listed
2-6 FUNCTIONAL & TECHNICAL DESCRIPTION November 07
To Next Page
Loading...
