CAPINTEC, INC. CAPTUS
®
600
1. WELL
2. PROBE
0. RETURN TO PREVIOUS SCREEN
14:32
CONVERSION FACTORS
3. VIEW/PRINT CONV FACTORS
Figure 5-21
Press 3 to view and/or print the current Conversion Factors.
Select the appropriate detector by pressing 1 or 2.
Note: The Screen heading will say “CF FOR PROBE” or “CF FOR WELL” (
Figure 5-22),
depending on the chosen detector.
Entering Nuclide Name
13:06
CF FOR WELL
OK
NUCLIDE NAME: >
DONE
Figure 5-22
Type the one or two letter symbol for the nuclide. If this nuclide has just one letter, be sure to
press the SP (Space) key after the first letter. Then type the two or three numbers that
indicate the mass number for this nuclide.
Note: Use the “*” key to add the “m” for Metastable, if applicable.
The system is automatically in letter mode or number mode in the appropriate places.
November 07 SYSTEM INITIALIZATION 5-13
To Next Page
Loading...
