EasyManua.ls Logo

Capintec CAPTUS 600 - Chapter 15 Lab Tests: Urine Test; Introduction; Performing Schilling Test Measurements

Capintec CAPTUS 600
218 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
CAPINTEC, INC. CAPTUS
®
600
CHAPTER 15
LAB TESTS: URINE TEST
INTRODUCTION
This chapter describes the Schilling Test Urine Test.
In the Main Lab Tests Screen, press the F1 [URINE] key. The Schilling Test Screen (
Figure
15-1
) will appear.
14:32
SCHILLING TEST
Figure 15-1
If patient demographics have not yet been input, do so according to the instructions in
CHAPTER 14 – LAB TESTS SETUP.
PERFORMING SCHILLING TEST MEASUREMENTS
To perform the actual measurements with this protocol, the system assumes the following
samples have been prepared for counting.
1. Aliquot of urine sample collected over the test period.
2. Co57 Standard having the identical volume and geometry as the test urine sample
above.
To perform the measurement, move the cursor next to the patient name with the ARROW
keys and press the F4 [MEAS] key.
Figure 15-2 will appear.
November 07 LAB TESTS: URINE TEST 15-1

Table of Contents

Related product manuals