CAPINTEC, INC. CAPTUS
®
600
CHAPTER 12
WIPE TEST SETUP
INTRODUCTION
Several items must be set up in order to do Wipe Testing.
To access the Wipe Setup, press the HOME key and then the UTIL key. The main Utilities
menu (
Figure 12-1) will appear.
UTILITIES
1. MULTICHANNEL ANALYZER
2. STAFF BIO ASSAY RESULTS
3. SETUP
4. DIAGNOSTICS
0. RETURN TO PROBE SCREEN
14:32
Figure 12-1
Note: Selection 0 will display “RETURN TO WELL SCREEN” if the Utilities menu is
accessed from the Well main screen.
Press 3 to select SETUP. The message “PASSWORD:” will appear. Type the last three digits
of your CAPTUS
®
600 serial number, and press the ENTER key. The Setup menu (Figure
12-2
) will appear.
1. Ci/Bq
2. TEST DAT
3. THYROID UPTAKE
4. BIO ASSAY
6. ACTIVITY CONVERSION FACTORS
SETUP
5. AUTO CALIBRATION
7. WIPE AND MCA SETUP
8. OTHE
0. RETURN TO UTILITIES MENU
14:32
Figure 12-2
November 07 WIPE TEST SETUP 12-1
To Next Page
Loading...
