CAPINTEC, INC. CAPTUS
®
600
14:32
TU PROTOCOLS
ADD
EDIT
DEL
DONE
P
> MAIN PROTOCOL
2ND PROTOCOL
PROTOCOL I131
Figure 7-10
14:32
TU PROTOCOLS
DD
DONE
Figure 7-11
Adding a Protocol
Press the F1 [ADD] key.
Note: If 4 protocols are already stored in the CAPTUS
®
600, the following message will
appear:
NO ROOM FOR MORE PROTOCOLS
Press Any Key to Continue
A protocol will have to be deleted to make another entry.
While entering data for a protocol, the BSP key can be used to go back any number of
screens to review or change entries.
When the F1 [ADD] key is pressed, the Protocol Name Screen (
Figure 7-12) will appear.
14:32
TU PROTOCOLS
NUM
OK
NAME: >
Figure 7-12
The protocol name can consist of up to 20 characters, letters and/or numbers.
7-6 THYROID UPTAKE SETUP November 07
To Next Page
Loading...
