CAPINTEC, INC. CAPTUS
®
600
13:06
MULTICHANNEL ANALYZER
SETUP
DONE
P
Figure 18-9
Press PRINT [P] to print a summary of the Setup.
Press F4 [DONE] when entering the setup is finished.
You will be returned to the list of existing setups.
Editing a Setup
To edit an existing setup, move the cursor to the desired setup and press F2 [EDIT].
The screens are the same as in adding a setup, except that the current values are displayed.
Deleting a Setup
To delete an existing setup, move the cursor to the desired setup and press F3 [DEL].
You will be asked if you want to delete that setup. Answer Y to delete it. Answer N if it was
chosen by mistake.
Printing All the Setups
To print all the setups, press PRINT [P] when the setups are listed.
18-6 MULTICHANNEL ANALYZER SETUP November 07
To Next Page
Loading...