EasyManua.ls Logo

Capintec CAPTUS 600 - Pre-Dose Measurement

Capintec CAPTUS 600
218 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
CAPINTEC, INC. CAPTUS
®
600
If the final count value does appear to be correct, press Y and ENTER. The Measure Thigh
Screen (
Figure 8-16) will appear.
14:32
THYROID UPTAKE
DASILVA, AND
START
EXIT
PROTOCOL: 1 CAPSULE
MEASURE
THIGH
AT: 25 CM
COUNTING REPETITION # 1 / 2
Figure 8-16
If the protocol selected calls for more than one repetition, the system performs another
acquisition. Re-position the Probe for each repetition. The system will return to
Figure 8-13
for each repetition of the Neck measurement.
If the second repetition is not desired, press F2 [ABORT] during the count and the
measurement will not be used.
Position the probe at the patient's thigh and press the F4 [START] key.
The next two screens that will appear on the display are exactly like
Figure 8-14 and Figure
8-15
, and they function with the same directions given above for those screens.
PRE-DOSE MEASUREMENT
If the protocol indicates that a Pre-Dose Measurement is to be performed, the Pre-Dose
Screen (
Figure 8-17) will appear.
14:32
THYROID UPTAKE
SKIP
PRE-DOSE MEASUREMENT: MEAS
OK
Figure 8-17
November 07 THYROID UPTAKE GENERAL INSTRUCTIONS 8-9

Table of Contents

Related product manuals