Capintec CAPTUS 600 - Changing the Time and Date Setting

CAPINTEC, INC. CAPTUS
®
600
CHOOSE DATE ENTRY FORMAT
FORM
OK
FORMAT: MMDDYY
Figure 5-2
Press F1 [FORM] to switch from MMDDYY to DDMMYY to YYMMDD.
When the desired format is displayed, press F4 [OK].
Changing the Time and Date Setting
The Capintec CAPTUS
®
600 has an internal clock so that the date and time of all procedures
can be documented. It is important that Date and Time be set properly before using the
CAPTUS
®
600. All sources are decay corrected based upon the CAPTUS
®
600 internal
clock.
When the Other menu appears (
Figure 5-1), press 1 to select SET DATE / TIME. The current
date and time will be displayed (
Figure 5-3).
OCT 06 2007 11:01
DO YOU WANT TO CHANGE
DATE OR TIME?
IT IS NOW
Figure 5-3
If the Date and/or Time needs to be changed, press Y and then press the ENTER key.
5-2 SYSTEM INITIALIZATION November 07