To Next PageTo Next Page
Need help?Do you have a question about the Capintec CAPTUS 3000 and is the answer not in the manual?
General| Brand | Capintec |
|---|---|
| Model | CAPTUS 3000 |
| Category | Medical Equipment |
| Language | English |
General introduction to the manual and system.
Details the components of the basic system configuration.
Classification of the equipment according to safety standards.
Information on radio frequency energy and potential interference.
Overview of the system's factory pre-configuration and installation.
Essential precautions for safe and reliable operation.
Importance of warnings and instructions for safe usage.
Explains various safety symbols used in the manual.
Details specific warning and caution labels on the equipment.
Lists important cautions and notes for operation and maintenance.
Provides general advice for safe operation and handling.
Specifies the intended users and applications of the system.
Outlines the required qualifications for system operators.
Describes the system's capabilities for various tests.
Details the system's hardware components and architecture.
Lists specific technical details of system hardware and requirements.
Overview of the Windows-based software and user interface.
Explains common Windows controls and interaction techniques.
Describes the main screen and access to user modules.
Lists keyboard shortcuts for navigation and operations.
Instructions for system installation and initial checkout.
Specifies operational and storage environmental conditions.
Details input power, fuse types, and transformer output specifications.
Step-by-step guide for powering up the system.
Procedures for signing in and managing user access.
Instructions for adding new user accounts to the system.
Procedure for changing user passwords.
How to view and manage user logon/logoff records.
Guide for initial system setup and parameter configuration.
Procedure for starting the system after initial setup.
Importance of periodic quality assurance tests for system performance.
Recommended schedule for performing QA tests.
Steps to configure parameters for QA tests.
Procedure for calibrating the system automatically.
How to perform the constancy test for system performance.
Procedure for performing the Chi-Square test.
Steps for performing the Minimum Detectable Activity (MDA) test.
How to access and view system configuration parameters.
Procedures for viewing and printing QA test history.
Overview of the system's isotope library and its uses.
How to display and print the list of isotopes.
Steps to add new isotope information to the library.
Procedure for modifying existing isotope data.
How to remove isotopes from the library.
Steps to measure isotope efficiency.
How to manually input efficiency values for isotopes.
Defines Thyroid Uptake and its clinical significance.
A concise guide to performing the Thyroid Uptake procedure.
How to set up measurement and dose administration protocols.
Procedures for entering and managing patient data.
How to view and modify system setup for Thyroid Uptake.
Detailed steps for performing Thyroid Uptake measurements.
How results are calculated and displayed.
Purpose of the Wipe Test module for contamination detection.
Concise steps for performing a wipe test.
How to configure default parameters for wipe locations.
Procedure for choosing isotopes for wipe testing.
How to add wipe locations to predefined groups.
Steps to create and manage custom groups for wipe locations.
Modifying details of existing wipe locations.
How to remove wipe locations from the system.
Detailed steps for performing wipe measurements.
How to search, view, and print wipe test results.
Purpose of the Absorbed Dose ALERT module for screening internal contamination.
Explains the methodology for converting counts to absorbed organ dose.
Overview of the main screen and initial date verification.
How to set up parameters for a specific incident.
Procedures for adding patient data for screening.
How to modify existing patient information.
Steps for removing patient records.
Detailed instructions for performing dose measurements.
How the system collects and displays measurement data.
Procedure for backing up the database.
How to access previously archived data.
How to display and print patient measurement reports.
Steps for exporting patient data to Excel.
Overview of in vitro testing modules for urine and blood.
Details the Schilling Test for B-12 deficiency diagnosis.
Procedure for measuring blood volume using I-125.
Method for determining red blood cell volume using Cr51.
Steps for diagnosing hemolytic anemia via RBC survival.
Purpose of bioassays for monitoring radiation worker exposure.
Configuration of parameters for bioassay measurements.
Addresses isotope spillover and correction methods.
Administrator procedure to add staff to the bioassay system.
How administrators edit staff member details.
Administrator procedure to remove staff members.
Step-by-step guide for performing bioassay measurements.
How to access and print bioassay reports.
Overview of repeated measurements at timed intervals.
Configuration of parameters for time activity analysis.
Steps for performing time-based measurements.
How to save measurement data in TAA or Excel format.
Procedures for loading and viewing saved TAA files.
Overview of the Multichannel Analyzer (MCA) module and its capabilities.
Controls for data acquisition and spectrum display.
How to select and switch between different detectors.
Techniques for adjusting the spectrum's vertical and horizontal scales.
Options for automatically stopping counts based on limits.
How to assign a name or description to a spectrum.
Defining and managing Regions of Interest in spectra.
Procedures for saving and recalling spectral data and MCA configurations.
Overview of the archive feature for data backup and management.
Steps to create a system backup archive.
How to access previously created archive files.
Procedures for selecting, viewing, and printing archived data.
Basic maintenance, fuse replacement, and preventative measures.
Detailed instructions for cleaning various system components.
Recommended schedule for preventative maintenance and QA tests.
Guidelines for disposing of system components according to regulations.
Recycling/material codes and disposal information for the floor stand.
Recycling/material codes and disposal information for the table top stand.
Information on system warranty and authorized service.
Annual inspection procedure for the collimator mounting block.
Annual inspection procedure for the spring-arm assembly.
Guidance on replacing the computer's internal battery.
Instructions for replacing power line fuses in the isolation transformer.
List of available accessories and replacement parts.
Guidelines for proper shipping and handling conditions.
Purpose and capabilities of the Custom Protocols module.
How to access and begin using custom protocols.
Functions for adding, viewing, and deleting custom protocols.
Procedures for adding and managing patient data for custom protocols.
Steps for performing measurements using custom protocols.
How data is acquired within custom protocols.
Guide to setting up Excel workbooks for custom protocol analysis.
