CAPINTEC, INC. CAPTUS
®
3000
PREFACE
GENERAL ........................................................................................................ 1
SYSTEM DESCRIPTION .................................................................................. 1
MEDICAL EQUIPMENT SAFETY CLASSIFICATION ...................................... 2
ELECTROMAGNETIC INTERFERENCE POTENTIAL .................................... 2
INSTALLATION ............................................................................................... 3
IMPORTANT SAFETY INFORMATION ............................................................ 3
TRADEMARKS ................................................................................................ 3
GENERAL
Thank you for purchasing the Capintec line of Thyroid Uptake Measurement Systems. Every
effort has been made to ensure that the information in this document is complete, accurate,
and up-to-date. Mention of products manufactured by other companies does not necessarily
constitute endorsement by Capintec, Inc. Capintec assumes no responsibility for the results
of errors beyond its control.
Please address any comments pertaining to this manual to:
CAPINTEC, Inc.
620 Alpha Drive
Pittsburgh, PA 15238
Phone (412) 963-1988
Fax (412) 963-0610
Note: Federal Law restricts this device to sale by or on the order of a physician,
pharmacist or other licensed professional.
SYSTEM DESCRIPTION
Your new CAPTUS
®
3000 is available in several configurations. Please take a moment to
review your system to determine exactly the configuration you have received. The basic
Thyroid Uptake System consists of the following:
• Optional Floor Stand or Table Top Stand
• TUS Collimator
• Isolation Transformer
• NaI (sodium iodide) Detector with Detector Socket Base
Note: Two versions of detectors are available: Flat Face or Drilled.
• Computer System with MCA Board installed
November 13 PREFACE P-1
To Next Page
Loading...
Need help?
General
