Capintec CAPTUS 3000 User Manual

CAPINTEC, INC. CAPTUS
®
3000
CAUTION: To ensure optimum performance of CAPTUS
®
3000, before using the
Lab Tests module, perform the System Setup Procedures as outlined in
CHAPTER 4: GENERAL SETUP.
INTRODUCTION
The Lab Tests module on the CAPTUS
®
3000 Main screen is comprised of all the in vitro
testing modules for urine and blood – Schilling Test, I 125 and Cr51 Blood Volume Test and
RBC Survival Test.
Click the
button or press Alt+L on the CAPTUS
®
3000 Main screen to access all
the Lab Tests. Figure 10-1 Lab Tests Main Screen will appear.
Figure 10-1 Lab Tests Main Screen
All the tests in the Lab Tests module have the same screen layout. As in Figure 10-2
Schilling Test Main Screen, they have the Exit, Add, Edit, Delete, Delete All, Setup, Report
and Print function icons located at the top of the screen. The Patient Directory box,
displaying the patient records, appears in the middle of the screen. The Patient Status box
below displays the latest patient information (For complete results of the patient, use the
Report function located at the top of the screen). The
button at the
bottom of the screen is used to perform measurements for a selected patient. The Data
Acquisition screen also operates in an identical manner in each test.
10-2 LAB TESTS November 13

Capintec CAPTUS 3000 Specifications

General

Brand	Capintec
Model	CAPTUS 3000
Category	Medical Equipment
Language	English