CAPINTEC, INC. CAPTUS
®
3000
Figure 10-70
3. Click the button or press the Y key to confirm the deletion or click the
button or press the N key to cancel.
4. To delete all the patients at once, simply click the
icon. You will be prompted to
confirm the deletion. Figure 10-71 will appear.
Figure 10-71
5. Click the
button or press the Y key to confirm the deletion. Otherwise, click
the
button or press the N key.
Making Measurements
CAUTION: Calibration is recommended before making any measurements. Refer to
CHAPTER 5: QUALITY ASSURANCE TESTS; SECTION: AUTO
• Before making any measurements on a patient, verify that all required patient information
has been entered.
• Make sure the default settings on Edit Patient screen and the Setup screen are
appropriate. The values on Edit Patient screen override those on the Setup screen.
1. To select a patient for the test, click on that record in the Patient Directory box on Figure
10-64 RBC Survival Test Main Screen. The Patient Status box will show the current
status of the patient. If this box reads, “All Data has been entered”, the
button at the bottom of the screen is accessible and the test can
be started. If data is partially entered, the
button is inaccessible.
10-48 LAB TESTS November 13