CAPINTEC, INC. CAPTUS
®
3000
Normal Range (Female / Male) frames
Minimum and Maximum (ml/kg) for Whole Blood, Plasma and Red Blood Cells –
These numbers will define a range of values for blood, plasma and red blood cell
volumes respectively, for Females and Males, which can be considered normal for
the patient’s weight. They are entered as seen fit by the doctors. Out of range results
indicate a medical condition and will be flagged in the report. Entering these values is
optional.
2. To input new values in any frame, click in the appropriate text box or radio button or use
the Tab key to move from one selection to another.
3. Click the
button to save changes or click the button to discard the
changes and return to Figure 10-27 I 125 Blood Volume Test Main Screen.
• The Administered to Standard Activity Ratio, Sample Volume and
Counting Time fields appear again, while adding a patient for the I-125 Blood
Volume Test. Any changes made on the Add Patient screen will override the
default values entered in the Setup.
• For greater flexibility, set Repetitions to 2, as the second repetition may be
skipped if desired, while performing the measurements.
• To return to previous screen without saving changes press the Esc key.
Adding Patients
Note: All fields in bold are required, before beginning the I-125 Blood Volume Test.
However, you may enter the Patient Name, Date of Birth and Patient ID alone, click
the
button and input the remaining information later. The Patient Status
box on Figure 10-27 I 125 Blood Volume Test Main Screen will display the message
“Data Partially Entered”.
1. Click the
icon on Figure 10-27 I 125 Blood Volume Test Main Screen. The
Patient Information screen appears as shown in Figure 10-29, with information to be
entered in three sections.
November 13 LAB TESTS 10-21
To Next Page
Loading...
Need help?
General
