CAPINTEC, INC. CAPTUS
®
3000
• You can group wipe locations according to the frequency with which they
are performed or by the technician’s share of duties etc. (e.g. wipe tests
done daily or wipe tests done by “Tom” can be grouped together).
• Changing the group name is recommended to reflect the kind of group.
EDITING WIPE LOCATION INFORMATION
1. From Figure 8-2 Main Wipe Test Screen, select a group in the Preset Groups or User
Defined Groups frame by clicking in its radio button to view only those wipe locations
that belong to that group. For example, selecting the Work Areas group will display all
locations entered with Type as Work Area. Selecting Group 2 will show all locations that
you added to Group 2. Selecting ALL will show all the existing wipe locations in all the
groups.
2. Click inside the Wipe Locations box to make it active.
3. To select a wipe location for editing, use the keys or Page Up and Page Down keys
to move up or down in the wipe location list. If the list is long, the scroll bar is also
available. To reach a particular location, press the first letter of the location name. Press
the key if necessary, to go further down.
In Figure 8-8 below, Tech187 group is selected and only wipe tests belonging to that
group appear. To see all wipe locations, select All in the Preset Groups frame.
Figure 8-8
4. Click the
icon. Figure 8-9 Edit Wipe Location Screen will appear.
November 13 WIPE TESTS 8-9
To Next Page
Loading...
Need help?
General
