CAPINTEC, INC. CAPTUS
®
3000
3. Click in the text box to be edited and type over the existing information.
Note: All fields in bold are required before testing can begin.
4. Click the
button to save changes or click the button to discard the
changes and return to Figure 10-27 I 125 Blood Volume Test Main Screen.
Deleting Patient Information
Note: If you wish to save patient information before deleting, refer to CHAPTER 14:
ARCHIVE.
1. To select one or more patients for deletion, click in the check box to the left of the patient
name in the Patient Directory box on the Main I 125 Blood Volume Test Screen (Figure
10-33). A check mark should appear in the check box to indicate it has been selected.
The patient can also be selected by first highlighting the desired patient by clicking and
then double-clicking anywhere in the grid to place a check in the box. To deselect a
patient, click in their check box again or double-click anywhere in the grid while the
desired patient is highlighted and the check will be removed from the check box.
Note: The status of a check box can be toggled by quickly double-clicking the desired
item.
Figure 10-33
2. Click the
icon. Figure 10-34 will appear.
Figure 10-34
3. Click the button or press the Y key to confirm the deletion or click the
button or press the N key to cancel.
November 13 LAB TESTS 10-25
To Next Page
Loading...
Need help?
General
