Capintec CAPTUS 3000 - Measurement Screen

CAPINTEC, INC. CAPTUS
®
3000
Measurement Screen
The Measurement screen is identical in all the test procedures and is as shown in Figure 3-5.
The live time elapsed while counting appears on the upper right hand corner of the screen.
The spectrum of the measurement is displayed in the white box.
Figure 3-5
The counting lasts for a duration as specified on the Test Setup screen.
To interrupt the counting, three options are available:
•
button or press Alt+R – To discard collected counts and begin counting
again.
•
button or press Alt+S – To stop collecting counts midway and save
the data.
•
button or press Alt+C – To stop collecting counts midway and discard the
data collected.
3-10 GENERAL OPERATING INSTRUCTIONS November 13