CAPINTEC, INC. CAPTUS
®
3000
New Incident
Click the icon on Figure 9-3 Absorbed Dose ALERT Main Screen. Figure 9-5 will
appear.
Figure 9-5
Note: The button will only be enabled after an initial incident has been set
up.
Click the button. Figure 9-4 Incident Setup Screen will appear.
1. Input all necessary values and click the appropriate text box or radio button or use the
Tab key to move from one selection to another.
2. Click the button to save changes or click the button to discard the
changes and return to Figure 9-3 Absorbed Dose ALERT Main Screen.
QUICK TIP:
• To return to previous screen without saving changes press the ESC key.
9-6 ABSORBED DOSE ALERT July 14
To Next Page
Loading...
