CAPINTEC, INC. CAPTUS
®
3000
Figure 9-12
1. To input new values in any frame, click the appropriate text box or radio button or use the
Tab key to move from one selection to another.
2. Click the button to save changes or click the button to discard the
changes and return to Figure 9-3 Absorbed Dose ALERT Main Screen.
Note: Changing any of the parameters will not affect patients which were already counted
before the edit took place. All patients added after the edit will use the changed
parameters.
QUICK TIP:
• To return to previous screen without saving changes press the ESC key.
ADDING PATIENTS
Note: All fields in bold are required before you can begin an Absorbed Dose ALERT
emergency screening measurement.
1. Click the icon on Figure 9-3 Absorbed Dose ALERT Main Screen. Figure 9-13
Patient Data Screen will appear. All information input in the Incident Setup will appear on
this screen.
July 14 ABSORBED DOSE ALERT 9-11
To Next Page
Loading...
Need help?
General
