CAPINTEC, INC. CAPTUS
®
3000
2. To alter any information entered in Incident Setup, click the
button. A message box will appear asking if you are sure you want to change the Incident
Setup Values. If Yes is selected, the disabled (grayed-out) boxes will become enabled.
Note: Only change the Incident/Site ID if there is something unique about the incident or
site for this patient.
Figure 9-13 Patient Data Screen
• Click in the text box or use the Tab key to move from one text box to another.
To select from drop-down list use or keys.
3. Patient Information.
• Patient ID: A unique ID assigned to each patient (ex. social security number). This
field is required and can be any combination of alphanumeric characters to a
maximum of 20 characters.
• Sex: Select male or female from the drop-down list box or press the M or F key. This
field is required.
9-12 ABSORBED DOSE ALERT July 14
To Next Page
Loading...
