CAPINTEC, INC. CAPTUS
®
3000
Storage
The instrument should be stored where the temperature is stable and the range is
from +39°F to +110°F (+4°C to +43°C) and the maximum relative humidity is 90%
non-condensing for maximum reliability.
The instrument should be stored where the barometric pressure is within a range of
15–33 inches of mercury (51–112 kilopascals).
CAUTION: If these environmental requirements are not followed, the instrument may
display erroneous readings
Warm Up Period
Approximately 30 minutes should be allowed for the instrument to stabilize. While the
instrument is warming up, it is strongly recommended that you become familiar with the
CAPTUS
®
3000.
System Power Requirements
CAUTION: If the input voltage to the following items is not within the stated
limits, the unit may not function correctly or may be damaged
Input Power
Line Voltage: ............. 115 or 230 Vac depending on model ordered
Line Frequency: ........ 60 or 50 Hz
Current: ..................... 2.0 Ampere @ 115V
1.1 Ampere @ 230V
Fuse: For 115V use T 3.15AH, 250V, (Time Delay)
For 230V use T 2.5AH, 250V, (Time Delay)
Isolation Transformer Output
Computer and Monitor combined
Output Voltage: ......... 115Vac
Current Output: ......... 1.9A
Frequency: ................ 50/60Hz
Printer
Output Voltage: ......... 115Vac
Current Output: ......... 0.7A
Frequency: ................ 50/60Hz
Printer
HP Officejet 6000 Series (or equivalent) Printer (optional)
100-240Vac, 50/60Hz, 1.5A
July 14 FUNCTIONAL & TECHNICAL DESCRIPTION 2-9
To Next Page
Loading...
Need help?
General
