Capintec CAPTUS 3000 User Manual

CAPINTEC, INC. CAPTUS
®
3000
The and buttons will be disabled until
an incident is selected (highlighted) in the Incident list box.
2. To select an incident, click on the incident name in the list box on Figure 9-7 Incident
Selection Screen. The Incident name will become highlighted and the
and buttons will become enabled as
shown in Figure 9-8.
Figure 9-8
3. Click the button to set the highlighted incident as the currently
active incident. The Incident Setup Screen (Figure 9-6) will re-appear displaying the
parameters for the selected incident.
QUICK TIP:
• To return to previous screen without saving changes press the ESC key.
Note: Once an incident is selected, it becomes the currently active incident. Any patients
that are added after changing the incident will use the selected incident until another
incident is set up or selected.
Delete Incident
Note: The currently active incident cannot be deleted without first setting another incident
as the current incident.
9-8 ABSORBED DOSE ALERT July 14

Capintec CAPTUS 3000 Specifications

General

Brand	Capintec
Model	CAPTUS 3000
Category	Medical Equipment
Language	English