CAPINTEC, INC. CAPTUS
®
3000
ADD USER
From Figure 4-3 Admin Log On Sign In Window, click the button.
Add User – Staff Member
If the user to be added is a staff member, in the “Is User a Staff Member?” frame, select the
Yes radio button. Figure 4-5 Add User (Staff Member) Window will appear.
Figure 4-5 Add User (Staff Member) Window
Note: In order for the Staff Member List to be displayed, Staff Member’s must be added in
the Bioassay module in the CAPTUS
®
3000 software as described in CHAPTER 11:
BIOASSAY, SECTION: ADDING STAFF MEMBERS. If no Staff Members have been
added, the “Is User a Staff Member?” frame will be grayed-out (disabled) and
defaulted to No and the Select Staff Member List will not be displayed.
Select the Staff Member from the displayed list of Staff Members. Setting the user as a Staff
Member allows that user to access, count and print his/her own Bioassay data.
Input the new User Name for the selected Staff Member and then the Password. Input the
Password again in the Verify Password text box.
When the
button is clicked, the new user and password will be accepted and
Figure 4-3 Admin Log On will re-appear.
November 13 GENERAL SETUP 4-7
To Next Page
Loading...
Need help?
General
