CAPINTEC, INC. CAPTUS
®
600
Activity of a Nuclide
The feature is only available if Calibration Test has been performed during the current
calendar day.
The counts in a Region of Interest corresponding to a given nuclide can be obtained by
pressing one of the Pre-Set Nuclide keys (
Cr51, Co57, Ga67, Tc99m, In111, I131, I123,
I125, Tl201), a USER key which has had a nuclide assigned to it or the NUCL key. After the
NUCL key is pressed, enter the name of the nuclide and press ENTER.
The counts in the ROI are displayed on the top line.
Exiting MCA Measurement
To exit the MCA Results Screen, press the BSP key, and the display will return to the
Parameter Entry Screen.
19-8 MULTICHANNEL ANALYZER OPERATION November 07
To Next Page
Loading...
