Capintec CAPTUS 600 - Blank Entries; Invalid Values; ENTERING DATE and TIME; Setup Password

CAPINTEC, INC. CAPTUS
®
600
BLANK ENTRIES
While some entries are optional and may be left blank (for example, patient’s date of birth)
most are required and must be filled in. If the [OK] key is pressed while a required entry is
blank, the following message appears:
ALL FIELDS MUST BE FILLED
Press Any Key to Continue
Press any key, and then enter the required value.
INVALID VALUES
If you input a value that's unacceptable, the following error message appears:
INPUT OUT OF RANGE
Press Any Key to Continue
Refer to the section
DATA ENTRY INPUT LIMITS on page 3-11 for a list of valid input
values.
ENTERING DATE and TIME
For some applications, the CAPTUS
®
600 system will ask you to input a time or date. Always
input digits, with no spaces, colons, or other punctuation marks. The CAPTUS
®
600 runs on
a 24-hour clock. For example, 9:30 a.m. would be input as 9, 3, 0, ENTER; while 9:30 p.m.
would be input as 2, 1, 3, 0, ENTER.
The Date can be entered in one of three formats: MONTH DAY YEAR (default), DAY
MONTH YEAR or YEAR MONTH DAY.
SETUP PASSWORD
A password is required to gain access to the SETUP choice from the main Utilities Menu.
The password (which CANNOT be changed) for all CAPTUS
®
600 systems consists of the
last three digits of the serial number. When the word “PASSWORD:” appears on the screen,
type these three numbers and press ENTER (your entry will not be displayed). The serial
number can be found on the data sheet shipped with your CAPTUS
®
600 system, as well as
in the upper right corner of all printouts from your CAPTUS
®
600.
3-8 GENERAL OPERATING OVERVIEW November 07