CAPINTEC, INC. CAPTUS
®
600
Press 7 to select WIPE AND MCA SETUP. The Wipe and MCA Setup menu (
Figure 12-3)
will appear.
1. WIPE DESCRIPTIONS
5. TRIGGER LEVEL/COUNT TIME
4. GENERIC CONVERSION FACTORS
3. ADDITIONAL NUCLIDES
WIPE AND MCA SETUP
2. USER KEY ASSIGNMENTS
14:32
6. MCA SETUP
Figure 12-3
WIPE DESCRIPTIONS
To make reports and printouts of Wipe Test measurements you must tell the
CAPTUS
®
600 where the wipes were taken. Wipes can be from one of 4 different areas.
These are:
• Work areas
• Unrestricted areas
• Receiving
• Sealed Sources
Entering Data for a Wipe Location
From the Wipe and MCA Setup Menu, press 1 to select WIPE DESCRIPTIONS. The Wipe
Descriptions Screen (
Figure 12-4) will appear.
1. WORK AREAS
2. UNRESTRICTED AREAS
3. RECEIVING
4. SEALED SOURCES
WIPE DESCRIPTIONS
5. PRINT ALL
14:32
0. RETURN TO WIPE SETUP MENU
Figure 12-4
12-2 WIPE TEST SETUP November 07
To Next Page
Loading...
