CAPINTEC, INC. CAPTUS
®
600
Input the time and date of administration if it is different from the default of “now”.
The number of capsules in the dose depends on the Multi-Capsule option:
• “NO”: The number of capsules in the dose is 1 and cannot be changed.
• “ONE”: The number of capsules in the dose may be entered.
• “EACH” or “ALL”: The number of capsules in the dose is the same as the number
that was measured and cannot be changed.
Press the F4 [OK] key when all the data is correct.
Figure 9-12 will appear.
KETCHUM, LIN
PROTOCOL: PROT 1
DONE
P
Figure 9-12
Press PRINT [P] to print a report of the capsule data.
Press F4 [DONE] to exit the screen and end the capsule measurement procedure.
UPTAKE MEASUREMENT
When it is time to perform the uptake, select the patient from the patient list and measure the
neck and thigh according to the directions in CHAPTER 8: THYROID UPTAKE: GENERAL
INSTRUCTIONS.
9-8 THYROID UPTAKE: ONE CAPSULE METHOD November 07
To Next Page
Loading...
