Capintec CAPTUS 600 - Setting up for Thyroid Uptakes or Wipe Tests; Setting up for Lab Tests (Urine & Blood); Setup for Staff Bioassay; Setup for Multichannel Analyzer

CAPINTEC, INC. CAPTUS
®
600
• Chi-Square Test: Reference CHAPTER 6: ACCEPTANCE & QUALITY
ASSURANCE TESTS, SECTION: CHI-SQUARE TEST for instructions on how to
perform this test.
• Minimum Detectable Activity: Reference CHAPTER 6: ACCEPTANCE & QUALITY
ASSURANCE TESTS, SECTION: MDA TEST for instructions on how to perform this
test.
SETTING UP FOR THYROID UPTAKES OR WIPE TESTS
• In order to perform Thyroid Uptake Measurements, the Thyroid Uptake Setup must be
performed first. Reference CHAPTER 7: THYROID UPTAKE SETUP.
• In order to perform Wipe Tests with the CAPTUS
®
600, the Wipe Setup must be
performed first. Reference CHAPTER 12: WIPE TEST SETUP.
SETTING UP FOR LAB TESTS (URINE & BLOOD)
• Before performing any of the Lab Tests please reference CHAPTER 13: LAB TESTS
SETUP.
SETUP FOR STAFF BIOASSAY
• In order to perform the Bioassay procedure, the Staff Bioassay Setup must be
performed first. Reference CHAPTER 17: STAFF BIOASSAY, SECTION: STAFF
BIOASSAY DATA.
SETUP FOR MULTICHANNEL ANALYZER
• Four MCA Setups can be stored in the CAPTUS
®
600. Reference CHAPTER 18:
MULTICHANNEL ANALYZER SETUP.
4-4 SYSTEM SETUP November 07