CAPINTEC, INC. CAPTUS
®
600
PREFACE
Thank you for purchasing the CAPINTEC line of Thyroid Uptake Measurement Systems.
Every effort has been made to insure that the information in this document is complete,
accurate, and up-to-date. CAPINTEC assumes no responsibility for the results of errors
beyond its control. Mention of products manufactured by other companies does not
necessarily constitute endorsement by CAPINTEC, Inc.
CAPTUS
®
600
and CII are registered trademarks of CAPINTEC, Inc.
OKIDATA and MICROLINE are registered trademarks of Oki Electric Industry Company, Ltd.
DESCRIPTION
Your new CAPTUS
®
600 is available in several configurations. Please take a moment to
review your system to determine exactly the configuration you have received. The basic
Thyroid Uptake System consists of the following:
• Thyroid Uptake Stand and NaI (sodium iodide) Detector with Collimator, which
includes an Isolation Transformer attached to stand.
Note: Two versions of detectors are available: Flat Face Probe or Drilled Probe.
• Readout Unit.
• Printer (Various options are available)
• Cable Set for connecting detector, printer, etc.
• Well Counter with drilled Well detector (Optional purchase).
YEAR 2000 COMPLIANCE
The CAPTUS
®
600 measurement systems contain information technology that accurately
processes date and time data between the years 1999 and 2000. These products, when
used in combination with products purchased from other manufacturers, whose products
properly exchange date and time information, will accurately process the date and time. All
future products are committed to meeting the same Year 2000 Compliance.
MEDICAL EQUIPMENT SAFETY CLASSIFICATION
• CLASS I EQUIPMENT energized from an external power source.
• TYPE B EQUIPMENT with no applied parts to the patient.
• Ordinary EQUIPMENT without protection against the ingress of water.
November 07 PREFACE p-1
To Next Page
Loading...