CAPINTEC, INC. CAPTUS
®
600
13:06
ADDITIONAL NUCLIDES
NUCLIDE NAME: FE55
HALF LIFE : M
ENERGY : keV
UNIT
OK
Figure 12-11
Press F1 [UNIT] to change the half-life unit from Minutes to Hours to Days to Years.
Input the half-life of the nuclide and the energy of the main photopeak of the nuclide.
When the data is correct press the F4 [OK] key. The data will be stored in memory and
Figure 12-10 will re-appear.
If all additional nuclides have been entered, press F1 [DONE].
Up to ten additional nuclides may be stored in the CAPTUS
®
600 memory. If the additional
nuclides memory is full and the user attempts to add another nuclide, the system will allow
the user to replace one of the entries or abort the operation. Additional nuclides may have
Conversion Factors assigned to them and be assigned to USER keys.
12-8 WIPE TEST SETUP November 07
To Next Page
Loading...
