94
Enter Setup
1663 Barcode Scanner User Guide
2.6.4 INTER-FUNCTION DELAY
By default, the int er- funct ion delay is set t o zero. Specify a value, ranging from 0 t o 254
in unit s of m illiseconds, t o m atch the com puter response tim e of t he keyboard interface.
Such delay t im e is insert ed bet ween every funct ion code (0x01 ~ 0x1F) being
transm it t ed. The longer the delay t ime is, t he slower the transm ission speed will be.
Inter-Function
Delay… (*0~254)
1) Read t he barcode above to specify t he inter-function delay.
2) Read t he “
Decim al Value” barcode on page 219 for the desired inter- funct ion delay (in
m illiseconds) .
3) Read t he “ Validat e” barcode on t he sam e page t o com plet e t his set t ing.
2.6.5 HID CHARACTER TRANSMIT MODE
By default, HI D interface sends dat a t o the host in batch, or use the scanner to read t he
“ By Character” barcode t o process dat a one character at a t im e.
*Batch Processing
By Character
2.6.6 SPECIAL KEYBOARD FEATURE
By default, the special keyboard feature is based on the fact ory definition. You can decide
whet her to apply the special keyboard feat ure. Refer to
Keyboard Wedge Table.
*Apply
Bypass
To Next Page
Loading...
