CipherLab 1663 Series - Entering PIN Code for Authentication; Use Preset PIN

1663 Barcode Scanner User Guide
222
Enter Setup
ENTERING PIN CODE FOR AUTHENTICATION
USE PRESET PIN
1) I n the configurat ion m ode, read the barcode below to use a preset PI N for
authenticat ion.
Use Preset PIN
2) Read one of t he barcodes to specify the PI N code, in decimal or hexadecim al.
By default, the PI N code is set t o “ 0000” . Maxim um 16 characters are allowed.
Enter PIN in
Hexadecimal…
E
nter PIN in
Decimal…
3) Read t he “
Decimal Value” barcode on page 219 or the “Hexadecim al Value” barcode
on page
220 for the desired digits or character string.
Read t he “ Clear PI N Code” barcode first if you need to re- input the PI N code.
Clear PIN Code
4) Read t he “ Validat e” barcode t o com plet e t his set t ing.