CipherLab 1663 Series - Activate Bluetooth HID & Select Keyboard Type

57
Update
Chapter 2 Selectin
g
Output Interface
2.1.1 ACTIVATE BLUETOOTH
®
HID & SELECT KEYBOARD TYPE
When Bluet oot h
®
HI D interface is activat ed, you will have to select a keyboard t ype to
com plet e t his set t ing. By default , Bluet oot h
®
HI D is act ivat ed on t he scanner, and the
keyboard type is set to PCAT (US) .
Activate Bluetooth
®
HID & Select Keyboard
Type…
1) Read t he barcode above to activat e Bluetooth
®
HI D and select a keyboard type.
2) Read t he “
Decim al Value” barcode on page 219. Refer to the t able below for the
num ber of desired keyboard t ype.
3) Read t he “ Validat e” barcode on t he sam e page t o com plet e t his set t ing.
Bluetooth
®
HID
The following keyboard types are supported —
No. Keyboard Type No. Keyboard Type
64 PCAT (US) 72 PCAT (Spanish)
65 PCAT (French) 73 PCAT (Port uguese)
66 PCAT (Germ an) 74 PS55 A01-2 (Japanese)
67 PCAT (I t aly) 75 User- defined table
68 PCAT (Swedish) 76 PCAT (Turkish)
69 PCAT (Norwegian) 77 PCAT (Hungarian)
70 PCAT (UK) 78 PCAT (Swiss Germ an)
71 PCAT (Belgium ) 79 PCAT (Danish)