116
Enter Setup
1663 Barcode Scanner User Guide
4.2.4 CODE LENGTH QUALIFICATION
To prevent the "short scan" error, define the "Lengt h Qualificat ion" sett ings to ensure
that the correct barcode is read by qualifying the allowable code lengt h.
I f "Max/ Min Length" is select ed, the m axim um length and t he m inim um length m ust
be specified. I t only accepts t hose barcodes wit h lengths t hat fall between m ax/ m in
lengths specified.
I f “ Fixed Length” is select ed, up t o 2 fixed lengths can be specified.
6) Read t he barcode to enable eit her Max. / Min. Lengt h qualificat ion or Fixed Length(s)
qualification.
*Enable Max./Min.
Length (0~127)…
Enable Fixed
Length(s)…
7) Read t he barcode for Max. Lengt h or Fixed Length 1, and follow st eps 3~ 4.
Repeat steps 2~ 4 for Min. Length or Fixed Lengt h 2.
Max. Length (*127) or
Fixed Length 1
Min. Length (*4) or
Fixed Length 2
8) Read t he “
Decim al Value” barcode on page 219 for the desired length.
9) Read t he “ Validat e” barcode on t he sam e page t o com plet e t his set t ing.
To Next Page
Loading...
