CipherLab 1663 Series - Defining Output Format; In this Chapter; Letter Case; Let T er Case

149
Update
You m ay configure t he form at of t he collect ed data out put to the host computer.
Barcodes read by the scanner will be processed in t he following sequence –
1) Perform charact er subst it ution on t he data scanned.
2) Add
Code I D and Length Code to the front of the dat a: [Code ID][Length Code][Data]
3) Process t he whole data in step 2 wit h user form at s. Data is now divided into fields by
user specified rules. Refer to
Chapt er 6 Applying Form ats for Dat a Editing.
4) Add
Prefix Code and Suffix Code before t ransm ission: [Prefix Code][Processed
Data][Suffix Code]
IN THIS CHAPTER
5.1 Letter Case .............................................................. 149
5.2 Character Subst itut ion ............................................... 150
5.3 Prefix/ Suffix Code ..................................................... 158
5.4 Code I D................................................................... 159
5.5 Lengt h Code ............................................................ 163
5.6 Mult i-Barcode Edit or .................................................. 167
5.7 Rem oval of Special Charact er ..................................... 170
5.1 LETTER CASE
By default, the alphabet ics t ransm ission is case-sensitive, m eaning t hat t he alphabet will
be transm it t ed according to their original case. I gnoring the original let t er case, select
[ Upper Case] t o output data in upper case only; ot herwise, select [ Lower Case] to out put
data in lower case only.
*Normal
Upper Case
Lower Case
Chapter 5
DEFINING OUTPUT FORMAT