CipherLab 1663 Series - Pager Beep Duration; Pager Beep Durat Ion

48
Enter Setup
1663 Barcode Scanner User Guide
1.15 PAGER BEEP DURATION
Paging funct ion is only act ivat ed when 1663 is in Power-Saving m ode. 1663 can be
woken up via receiving any Bluetooth
®
st atus com m and by pressing a key on the host
keyboard. The buzzer will continuously sound t wo short high tone beeps until the power
key is pressed on the scanner or the tim eout is reached, and t he scanner re-ent ers
power saving m ode.
By default, the pager beep durat ion is 5 seconds. Specify a value, ranging from 0 to 15.
(0~ 15 sec.; 0= Disable)
 Bluet ooth
®
HI D profile: Press any one of t he following keys “ Scroll Lock” , “ Num ber
Lock” or “ Caps Lock” on the host comput er t o t rigger the waking up of 1663.
 Bluet ooth
®
SPP Profile: Any com m and sent using Bluet ooth
®
SPP will trigger the
waking up of 1663.
Pager Beep Duration
0
~15 sec.
(*5 s)
1) Read t he barcode above to specify the desired beep active t im e.
2) Read t he “
Decimal Value” barcode on page 219. For example, read “1” and “5” for the
pager beep funct ion to be act ivat ed each 15 seconds aft er entering Power- Saving
m ode.
3) Read t he “ Validat e” barcode on t he sam e page t o com plet e t his set t ing.