CipherLab 1663 Series - Low Battery Alarm; Vibrator; Good Read Vibrator; Good Read Vibrator Duration

34
Enter Setup
1663 Barcode Scanner User Guide
1.4.3 LOW BATTERY ALARM
By default, t he built- in bat t ery alarm will sound when the batt ery charge get s low. I n
order to prevent data loss, it is advised to replace t he battery im m ediat ely when hearing
two short beeps (high t one).
Disable
*Enable
1.5 VIBRATOR
1.5.1 GOOD READ VIBRATOR
E
nable
Good Read Vibrator
*
Disable
Good Read Vibrator
1.5.2 GOOD READ VIBRATOR DURATION
By default, the Good Read Vibrat or st ays on for 1 second. Specify a value, ranging from
1 to 254 in units of 100 m illiseconds.
Good Read Vibrator
Time-out after
0.1
~
25.4 sec.
(*1 s)
1) Read t he barcode above t o specify the tim e int erval, in tent hs of seconds before t he
Good Read Vibrat or goes off.
2) Read t he “
Decimal Value” barcode on page 219. For exam ple, read “1” and “5” for t he
vibrator to vibrat e aft er 1.5 seconds good read.
3) Read t he “ Validat e” barcode on t he sam e page t o com plet e t his set t ing.