150
Enter Setup
1663 Barcode Scanner User Guide
5.2 CHARACTER SUBSTITUTION
Character substitution is perform ed on every occurrence of the first charact er specified. I f
only one character is specified, every occurrence of that charact er in t he barcode will be
taken away.
The first charact er will be replaced by the second character(s) .
Up to three set s of character substit ut ion can be configured.
I f “Bluet ooth
®
HI D” or “ USB HI D” is configured for interface, Key Type and Key Status
will t hen become applicable. You m ay decide whether or not t o apply Key St atus
when “ Norm al Key” is select ed for Key Type.
Key Type Key Status
Scan Code Only 1 scan code value is allowed.
Refer to 5.2.1 Select a Set for
Character Substituion.
N/ A
Norm al Key Up t o 3 character strings are allowed.
Add Shift
Add Left Ctrl
Add Left Alt
Add Right Ctrl
Add Right Alt
Refer to
Keyboard Wedge Table.
Not e: The charact er subst itut ion is perform ed only on t he barcode itself and before the
processing of editing form at s. I t is not applicable t o the Prefix/ Suffix Code, Code
I D, Length Code, or any Additional Field.
To Next Page
Loading...
