CipherLab 1663 Series - USB Virtual COM Via 3610; Activate USB Virtual COM; Inter-Function Delay; USB Virt Ual COM Via 3610

83
Update
Chapter 2 Selectin
g
Output Interface
2.5 USB VIRTUAL COM VIA 3610
Connect 3610 to the USB port of PC, and then connect the scanner to 3610. You m ay run
HyperTerm inal.exe on t he com puter t o view and capture the data transm ission from the
scanner.
2.5.1 ACTIVATE USB VIRTUAL COM
Activate 3610
USB Virtual COM
Not e: I f you are using USB Virt ual COM for t he first tim e, you m ust install it s driver from
the CD-ROM. Driver version 5.4 or lat er is required. Please remove older versions
before installing new ones!
2.5.2 INTER-FUNCTION DELAY
By default, the int er- funct ion delay is set t o zero. Specify a value, ranging from 0 t o 254
in unit s of m illiseconds, t o m atch the com puter response tim e of t he keyboard interface.
Such delay t im e is insert ed bet ween every funct ion code (0x01 ~ 0x1F) being
transm it t ed. The longer the delay t ime is, t he slower the transm ission speed will be.
Inter-Function
Delay… (*0~254)
1) Read t he barcode above to specify t he inter-function delay.
2) Read t he “
Decim al Value” barcode on page 219 for the desired inter- funct ion delay (in
m illiseconds) .
3) Read t he “ Validat e” barcode on t he sam e page t o com plet e t his set t ing.