38
Enter Setup
1663 Barcode Scanner User Guide
1.7.3 LASER MODE
The scanner will start scanning once t he t rigger is held down.
The scanning won't st op until ( 1) a barcode is decoded, ( 2) t he pre- set tim eout
expires, or ( 3) you release t he trigger.
Not e: Refer to “ Scanning Tim eout” .
*Laser Mode
1.7.4 AUTO OFF MODE
The scanner will start scanning once t he t rigger is pressed.
The scanning won't st op until (1) a barcode is decoded, and (2) the pre- set timeout
expires.
Not e: Refer to “ Scanning Tim eout” .
Auto Off Mode
1.7.5 AUTO POWER OFF MODE
The scanner will start scanning once t he t rigger is pressed.
The scanning won't stop unt il the pre- set tim eout expires, and, the pre- set tim eout
period re- count s after each successful decoding.
Not e: Refer t o “ Delay bet ween Re- read” and “Scanning Tim eout”.
Auto Power Off Mode
To Next Page
Loading...
