CipherLab 1663 Series - Good Read LED; Good Read LED Duration

30
Enter Setup
1663 Barcode Scanner User Guide
1.3.1 GOOD READ LED
*
Enable
Good Read LED
D
isable
Good Read LED
1.3.2 GOOD READ LED DURATION
By default, the Good Read LED stays on for 40 m illiseconds. Specify a value, ranging
from 1 to 254 in unit s of 10 m illiseconds.
Good Read LED
Time-out after
0
.01~2.54 sec.
(*40 ms)
1) Read t he barcode above to specify the t im e int erval before the Good Read LED goes
off.
2) Read t he “
Decimal Value” barcode on page 219. For exam ple, read “1” and “5” for t he
LED t o go off aft er 150 milliseconds.
3) Read t he “ Validat e” barcode on t he sam e page t o com plet e t his set t ing.