CipherLab 1663 Series - Separator for Date and Time

51
Update
Chapter 1 Understandin
g
t
he Barcode Scanner
Decoding Data and Time
Year Setup
Date Setup
Time Setup
1) Read t he barcode above t o apply tim e or dat e code separat ely, and follow steps 2~ 3.
2) Read t he “
Decimal Value” barcode on page 219 for the desired character string. For
example:
Year: Read “ 2” , “0”, “1” , “ 1” for the year sett ing as year= 2011.
Date: Read “1” , “ 1” , ”2”, “ 0” for t he date setting as date= Nov.20.
Tim e: Read “ 1” , “ 8”, “5” , “ 9” for t he tim e setting as t ime= 18: 59.
3) Read t he “ Validat e” barcode for each sett ing on the sam e page.
1.16.2 SEPARATOR FOR DATE AND TIME
The Dat e and Tim e can be split with a pre- select ed separat or, for example, “ / ” as
YYYY/ MM/ DD or “: ” as HH: MM: SS
Separator for
Date/Time
*“-”
Separator for
Month/Date
*“/”
Separator for
Hour/Minute
*“:”
1) Read t he barcode above to apply separat or to date or tim e separately, and follow
st eps 2~ 3.
2) Read t he “
Hexadecim al Value” barcode on page 220 for the desired character string.
For exam ple, read “3” and “A” for the separator to split the data wit h character [ : ] .
3) Read t he “ Validat e” barcode on t he sam e page t o com plet e t his set t ing.