CipherLab 1663 Series - Bluetooth SPP Slave; Activate Bluetooth SPP Slave Mode; Inter-Function Delay; Bluet Oot H SPP Slave

68
Enter Setup
1663 Barcode Scanner User Guide
2.2 BLUETOOTH
®
SPP SLAVE
For Bluet ooth
®
SPP Slave, refer to Chapt er 3 – Set t ing up a WPAN Connection for relat ed
connect ion set t ings.
2.2.1 ACTIVATE BLUETOOTH
®
SPP SLAVE MODE
This is SPP Slave Mode.
Activate Bluetooth
®
SPP, Slave Mode
2.2.2 INTER-FUNCTION DELAY
By default, the int er- funct ion delay is set t o zero. Specify a value, ranging from 0 t o 254
in unit s of m illiseconds, t o m atch the com puter response tim e of t he keyboard interface.
Such delay t im e is insert ed bet ween every funct ion code (0x01 ~ 0x1F) being
transm it t ed. The longer the delay t ime is, t he slower the transm ission speed will be.
Inter-Function
Delay… (*0~254)
1) Read t he barcode above to specify t he inter-function delay.
2) Read t he “
Decim al Value” barcode on page 219 for the desired inter- funct ion delay (in
m illiseconds) .
3) Read t he “ Validat e” barcode on t he sam e page t o com plet e t his set t ing.