147
Update
Chapter 4
Change Symbology Settings
4.19.1 SYSTEM NUMBER SELECTION
Decide whet her to decode t he ordinary UPC-E barcodes only or bot h UPC-E0 and UPC-E1
barcodes.
System num ber 0 enabled for decoding UPC-E0 barcodes.
System num ber 1 enabled for decoding UPC-E1 barcodes.
System Number 0 & 1
*System Number 0 Only
Warning: Because of t he way syst em num ber 1 is encoded, if bot h system numbers
are enabled, t he user m ight suffer from short scanning UPC-A or EAN-13
barcodes into UPC-E1 barcodes.
4.19.2 CONVERT TO UPC-A
Decide whet her to expand the read UPC- E barcode, as well as it s addons, into UPC- A.
After conversion, the dat a follows UPC-A form at and is affected by UPC-A
programm ing select ions (e.g. System Num ber, Check Digit ) .
Convert UPC-E to
UPC-A
*Do Not Convert
To Next Page
Loading...
