133
Update
Chapter 4
Change Symbology Settings
4.12 MSI
Enable
*Disable
4.12.1 VERIFY CHECK DIGIT
Select one of t he three calculations t o verify check digit when decoding barcodes. I f
incorrect , t he barcode will not be accepted.
*Single Modulo 10
Double Modulo 10
Modulo 10 & 11
4.12.2 TRANSMIT CHECK DIGIT
Decide whet her to include t he check digit in t he dat a being transm it t ed.
*Last Digit Not
Transmitted
Both Digits
Transmitted
oth Digits
Not Transmitted