Cisco 7925G Administration Guide

Configuration ReferenceDescriptionFeature
For more information, see:
•
Cisco Unified Communications
Manager Administration Guide, “Hunt
Group Configuration” chapter
•
Cisco Unified Communications
Manager System Guide, “Understanding
Route Plans” chapter
Provides load sharing for calls to a main directory number. A
hunt group contains a series of directory numbers that can
answer the incoming calls. When the first directory number in
the hunt group is busy, the system hunts in a predetermined
sequence for the next available directory number in the group
and directs the call to that phone.
Hunt group
For more information, see:
•
Cisco Unified Communications
Manager System Guide, “Cisco Unified
IP Phones” chapter
•
Cisco Unified Communications
Manager Features and Services Guide,
“Call Park and Directed Call Park”
chapter
Allows a user to transfer a ringing, connected, or held call
directly to a voice-messaging system.When a call is diverted,
the line becomes available to make or receive new calls.
Immediate Divert
For more information, see:
•
Cisco Unified Communications
Manager System Guide, “Cisco Unified
IP Phones” chapter
•
Cisco Unified Communications
Manager Features and Services Guide,
“Immediate Divert” chapter
Allows users to transfer incoming calls directly to their voice
messaging system or to the voice messaging system of the
original called party.
Immediate
Divert—Enhanced
For more information, see:
•
Cisco Unified Communications
Manager Feature and Services Guide,
“Intercom Configuration” chapter
•
Cisco Unified Communications
Manager Feature and Services Guide,
“Cisco Extension Mobility” chapter
Allows users to place and receive intercom calls from the line
view. You can configure intercom lines to:
•
Directly dial a specific intercom extension.
•
Initiate an intercom call and then prompt the user to enter
a valid intercom number.
Users can view the intercom call history from the Directory
menu.
Intercom
For more information, see Disable Java, on
page 165.
Enables the administrator to disable the ability to use Java on
the wireless phones.
Java Control
For more information, see Cisco Unified
Communications Manager System Guide,
“Cisco Unified IP Phones” chapter.
Allows users to apply the Join feature to calls that are on
multiple phone lines.
Join Across
Lines/Select
Cisco Unified Wireless IP Phone 7925G, 7925G-EX, and 7926G Administration Guide
157
Features, Templates, Services, and Users
Telephony Features Available

Cisco 7925G Specifications

General

Keypad number of keys	12
Display diagonal	2 \
Display resolution	176 x 220 pixels
Call waiting	Yes
Lines quantity	6 lines
Voice codecs	G.711a, G.722, G.729a, iLBC
Security algorithms	128-bit WEP, SSL/TLS, WPA
Supported network protocols	DHCP, TFTP, DNS, SCCP, SRST
Input voltage	100 - 240 V
Dimensions (WxDxH)	52 x 20 x 127 mm
Minimum system requirements	Cisco Unified Communications Manager 4.1, 4.2, 4.3, 5.1, 6.0, 6.1, 7.0 + Cisco Unified Communications Manager Express 4.3 +
Input frequency	50/60 Hz
Storage temperature (T-T)	-30 - 60 °C
Operating temperature (T-T)	0 - 40 °C
Operating relative humidity (H-H)	10 - 95 %
Product type	IP Phone
Product color	Gray
Safety	UL 60950, CSA 22.2 No.60950, EN 60950, IEC 60950, AS/NZS 60950, IEC 60529 (IP 54)
Certification	47 CFR 15 B ICES-003 B EN 55022 B AS/NZS CISPR 22 B CISPR 22 B VCCI B EN 61000-3-2 EN 61000-3-3 KN 22 EN 55024 EN 50082-1 EN 61000-6-1 EN 300386 EN 60601-1-2 KN
Compliance industry standards	IEEE 802.11a, IEEE 802.11b, IEEE 802.11g, IEEE 802.1X, IEEE 802.11e

Weight and Dimensions

Weight	138 g