Cisco 7925G Administration Guide

Configuration ReferenceDescriptionFeature
For more information, see Cisco Unified
Communications Manager System Guide,
“Cisco Unified IP Phones” chapter.
Allows user to join two or more calls that are on one line to
create a conference call and remain on the call.
Join/Select
For more information, see Cisco Unified
Communications Manager System Guide,
“Understanding Route Plans” chapter.
Allows users to log out of hunt groups and temporarily block
calls from ringing their phone when they are not available to
take calls. Logging out of hunt groups does not prevent nonhunt
group calls from ringing their phones.
Log out of hunt
groups
For more information, see:
•
Cisco Unified Communications
Manager System Guide, “Cisco Unified
IP Phones” chapter.
•
Cisco Unified Communications
Manager Features and Services Guide,
“Malicious Call Identification” chapter.
Allows users to notify the system administrator about
suspicious calls that are received.
Malicious caller
identification
(MCID)
For more information, see Cisco Unified
Communications Manager Administration
Guide, “Meet-Me Number/Pattern
Configuration” chapter.
Allows a user to host a Meet Me conference in which other
participants call a predetermined number at a scheduled time.
Meet Me conference
For more information, see:
•
Cisco Unified Communications
Manager Administration Guide,
“Message Waiting Configuration”
chapter
•
Cisco Unified Communications
Manager System Guide, “Voice Mail
Connectivity to Cisco Unified
Communications Manager” chapter
A light on the handset that indicates that indicates that a user
has one or more new voice messages.
Message waiting
indicator
Java MIDlet Startup, on page 169Enables the phone to automatically start a Java MIDlet in the
background when the phone powers on.
MIDlet Minimize to
Background When
Power On
For more information, see Cisco Unified
Communications Manager Features and
Services Guide, “Multilevel Precedence and
Preemption” chapter.
Provides a method of prioritizing calls within your phone
system. Use this feature when users work in an environment
where they need to make and receive urgent or critical calls.
Multilevel
Precedence and
Preemption (MLPP)
For more information, see Cisco Unified
Communications Manager Features and
Services Guide, “Music On Hold” chapter.
Plays music while callers are on hold.Music on hold
Cisco Unified Wireless IP Phone 7925G, 7925G-EX, and 7926G Administration Guide
158
Features, Templates, Services, and Users
Telephony Features Available

Cisco 7925G Specifications

General

Keypad number of keys	12
Display diagonal	2 \
Display resolution	176 x 220 pixels
Call waiting	Yes
Lines quantity	6 lines
Voice codecs	G.711a, G.722, G.729a, iLBC
Security algorithms	128-bit WEP, SSL/TLS, WPA
Supported network protocols	DHCP, TFTP, DNS, SCCP, SRST
Input voltage	100 - 240 V
Dimensions (WxDxH)	52 x 20 x 127 mm
Minimum system requirements	Cisco Unified Communications Manager 4.1, 4.2, 4.3, 5.1, 6.0, 6.1, 7.0 + Cisco Unified Communications Manager Express 4.3 +
Input frequency	50/60 Hz
Storage temperature (T-T)	-30 - 60 °C
Operating temperature (T-T)	0 - 40 °C
Operating relative humidity (H-H)	10 - 95 %
Product type	IP Phone
Product color	Gray
Safety	UL 60950, CSA 22.2 No.60950, EN 60950, IEC 60950, AS/NZS 60950, IEC 60529 (IP 54)
Certification	47 CFR 15 B ICES-003 B EN 55022 B AS/NZS CISPR 22 B CISPR 22 B VCCI B EN 61000-3-2 EN 61000-3-3 KN 22 EN 55024 EN 50082-1 EN 61000-6-1 EN 300386 EN 60601-1-2 KN
Compliance industry standards	IEEE 802.11a, IEEE 802.11b, IEEE 802.11g, IEEE 802.1X, IEEE 802.11e

Weight and Dimensions

Weight	138 g