Send documentation comments to mdsfeedback-doc@cisco.com
4-27
Cisco MDS 9000 Family Troubleshooting Guide, Release 3.x
OL-9285-05
Chapter 4 Troubleshooting Hardware
Troubleshooting Switching and Services Modules
Error Message PLATFORM-2-PFM_LC_REGISTRATION_FAIL: Could not register with Module
[dec].
Explanation
Module registration failed.
Recommended Action Replace the module.
Error Message PLATFORM-2-PFM_LC_STATUS: Module [dec] powered up with [dec] status.
Explanation
Status for module that failed registration.
Recommended Action Replace the module.
Error Message PLATFORM-3-MOD_PWRFAIL: Module [dec] failed to power up (Serial No.
[chars]).
Explanation
The module failed to power up.
Recommended Action Enter the show platform internal all module [dec] CLI command to collect
more information.
Introduced Cisco MDS SAN-OS Release 1.2(2a).
Error Message PLATFORM-3-MOD_PWRIDPROMFAIL: Module [dec] failed to power up due to
idprom read error.
Explanation
The module cannot be powered up because of an IDPROM read error.
Recommended Action Enter the show platform internal all module [dec] and show module
internal all module [dec] show sprom module [dec][dec] CLI command to read module IDPROM
contents to collect more information.
Error Message PLATFORM-5-MOD_PWRDN: Module [dec] powered down (Serial No. [chars]).
Explanation
The module is powered down.
Enter the show module, show platform internal all module[dec] and show module internal all
module [dec] CLI command to collect more information if you suspect module has been powered down
due to errors.
To Next Page
Loading...
Need help?
General