Cisco 9134 - MDS Multilayer Fabric Switch User Manual

Send documentation comments to mdsfeedback-doc@cisco.com
13-10
Cisco MDS 9000 Family Troubleshooting Guide, Release 3.x
OL-9285-05
Chapter 13 Troubleshooting IVR
IVR Issues
Border Switch Fails
If an IVR-enabled switch fails, you must update the IVR topology to reflect this change if you are not
using auto topology.
Symptom Border switch fails.
Table 13-7 Border Switch Fails
Symptom Possible Causes Solutions
Border switch fails. IVR topology incorrect. Choose Fabricxx > All VSANs > IVR and select the
Action tab in Fabric Manager. Check the Auto Discover
Topology check box and click Apply Changes. Select the
CFS tab and set ConfigAction to commit and click Apply
Changes.
Or use the ivr vsan topology auto CLI command to
automatically reconfigure the IVR topology, or use the ivr
vsan topology database CLI command to manually
reconfigure the IVR topology.

Cisco 9134 - MDS Multilayer Fabric Switch Specifications

General

Brand	Cisco
Model	9134 - MDS Multilayer Fabric Switch
Category	Switch
Language	English