Send documentation comments to mdsfeedback-doc@cisco.com
26-7
Cisco MDS 9000 Family Troubleshooting Guide, Release 3.x
OL-9285-05
Chapter 26 Troubleshooting Fabric Manager
Troubleshooting Fabric Manager Web Client
This clears the information from the server.
Note Any devices not currently accessible (may be offline) are purged.
Using Fabric Manager in a Mixed Software Environment
You can use Fabric Manager version 2.x to manage a mixed fabric of Cisco MDS 9000 Family switches.
Certain 2.x feature tabs will be disabled for any switches running a software version that does not support
those features.
Troubleshooting Fabric Manager Web Client
Using Fabric Manager Web Client, you can monitor MDS switch events, performance, and inventory,
and perform minor administrative tasks. Fabric Manager Web Client provides summary and drill down
performance reports. These reports are only available if you create a collection using Performance
Manager and start the collector.
This section includes the following topics:
• Cannot Access Fabric Manager Web Client, page 26-8
• Cannot Launch Fabric Manager Web Client, page 26-9
• Cannot Log Into Fabric Manager Web Client, page 26-11
Note You must log in with a network-access role to access the Admin tab in Fabric Manager Web Client.
Cannot Download Fabric Manager Web Client
Symptom Cannot download Fabric Manager Web Client.
Table 26-1 Cannot Access Fabric Manager Web Client
Symptom Possible Cause Solution
Cannot download
Fabric Manager Web
Client.
To download Fabric Manager Web
Client, you must have network-admin
role.
A network-admin can allow a network-oper to download
the client. See the “Allowing network-open Users to
Download Fabric Manager Web Client” section on
page 26-8.
Java cache may contain damaged or
incorrect files.
Empty Java cache and restart the download. See “Clearing
Java Cache” section on page 26-8.
To Next Page
Loading...
Need help?
General